Oh. Mom, you really do it all-- and we'd do anything for you!
❤ We'd reach into a honey badger's den to fetch your cell phone.
❤ We'd take you to a Nicholas Sparks movie when (not 'if') Dad is suddenly struck with a mysterious bug.
❤ We'd do your shopping and even pick up the stuff you get in the aisle with all those pink boxes.
❤ We'd tell you we love the Tuna Helper, made with spreadable meat 'cause you were out of tuna. Every time.
❤ We'd even re-enact our kindergarten performance of "I'm a Little Teapot" for you and your friends at the church ladies' luncheon.
❤ But, most of all... we'd go to Harbor Freight Tools for you!
What do you have planned for your mom this year? Nuts n' chews??! Actually, that's not bad... but it's not enough! Head out to your local Harbor Freight and take advantage of great deals geared for Mom's special day. Click the image below and see what we're talking about!
Well, it’s almost the end of April and you know what that means. April showers are all around us. And speaking of showers, why not keep yours in top condition with the handy Shower Valve Socket Set from Harbor Freight Tools? With this outstanding wrench set, you can save money by handling repairs on your own without having to pay for a professional plumber. Best of all, this useful item is just $9.99!
Now, it’s not like you’re going to need to use this wrench set very often. Unlike most tools, the Shower Valve Socket Set serves the very specific purpose of removing fittings and nuts from showers and tubs. But, if you discover that you have a leak, isn’t it comforting to know that you can potentially take care of this problem on your own? Yeah, I know, getting behind the faucet can seem a little intimidating but once you understand what’s involved, you’ll be amazed at how simple it can be.
Most faucet plates come right off with the use of an everyday screwdriver. At the most, you may need to pry off a cover to get at the screw but most designs have the screws right in the open so there’s no screwing around. After you have the faucet handle removed, you’ve reached the point where most home owners would be stymied. But, lucky you, you’ve got the Shower Valve Socket Set from Harbor Freight. Using one of the five double-sided sockets and the included turning bar, removing the valve stem is a piece of cake.
From there, the cause of your leak could be a couple of things. Maybe a damaged washer that needs to be replaced or even a worn stem valve. But the hardest part of removing the valve is already taken care of and you can get to the root of the problem often with no further assistance. This shower valve socket wrench set is extra-long to reach deep and get to those hard-to-reach valve stems, fittings and nuts and accommodates most jobs. Plus, with a zinc-plated steel construction, these suckers are built to last. For the do-it-yourselfers out there, this tool is a must-have!
So while you can’t control the precipitation outside, you can be in full control of your bathtub or shower with this great set. Whether it’s a leaky faucet, a damaged part that needs replacing or even if you’re just installing something new, the Shower Valve Wrench Socket Set pays for itself with a single use! And don’t forget, if you include a Harbor Freight 20% Off coupon, you save even more!
Congratulations on purchasing your new One Stop Gardens 10’ x 12’ Greenhouse! Growing vegetables, cultivating flowers or starting your botany experiment is now close at hand but did you know that you can get even more out of your greenhouse with some extra time, materials and patience? I recently came across a great article that highlights a few ways to expand your greenhouse in ways that you might not otherwise think of at http://hfgh10x12.blogspot.com/2007/08/this-is-greenhouse-we-bought-link-it.html. Let’s take a look at how you can take your greenhouse to the next level with just a few adjustments.
The greenhouse kit comes with a steel base that you would generally just place on the ground. The author of this article explains how to add some extra stability to your greenhouse in order to resist any weather conditions you may encounter like strong winds and heavy rain. “The popular solution is to build a wooden foundation, anchor it into the ground somehow, and mount the steel base on top,” she says. “Everyone finds their own way to do this, but most use at least 4 x 4 sized timbers for the base.”
You’ll also want to add a couple of diagonal beams at each corner before mounting the greenhouse base itself. With your greenhouse secured to a foundation, you can keep the base square and tight for years to come. And once you’ve got the steel base mounted to the wooden foundation, just apply some clear silicone caulk between the wood and the base to keep rain water from seeping in. In order to maintain the integrity of you greenhouse, you’ll need to plan for all types of unforeseen weather and environmental conditions. You can choose from a few different caulks on Harbor Freight’s website too, from Painter’s Acrylic Latex Caulk to Acrylic Latex Caulk plus Silicone.
Now you’re ready to start putting up the walls of your greenhouse. The article has a little tip to keep your frame and posts straight during construction as well. “As you put the corner posts up, temporarily attach the [included] diagonal braces for stability.” You’ll have to remove them before moving on to the next step but this way you can work with a bit more peace of mind and keep the aluminum frame straight and accurate until you add the vertical wall studs. It’s a good idea to check that the base is still square before moving on and make any necessary adjustments. It’s much easier to make minor adjustments as you go rather than a big one later.
Once you’ve got the greenhouse frame constructed, there are a few things you can do to upgrade it for stability in windier areas. The article advises to add horizontal braces at the tops of the walls to prevent the side walls from pulling away from each other. You can do the same for the front and back walls. Just attach a solid piece of material all the way across each wall to reinforce the structure and keep the elements from potentially warping the frame. The author explains how you can also keep the steel base from flexing: “This can be done by bolting small plates of some type to the top and bottom lip of the base at regular intervals, or by covering the inside of the base entirely with wood that's also attached to the top and bottom lip of the base.”
It’s also easy at this point to add insulation to your frame, she continues. “We used ¾” thick expanded polystyrene (styrofoam) insulation, cut into strips about 4 ¼” wide. We also stuffed some foam sill insulation in there first to remove as many air pockets as possible.” You can protect that insulation and further reinforce the base by attaching boards with screws to the top and bottom lips of the base. As the author says, “Now the base is insulated and stiffened by the attached board...and it looks a little dressier, too.”
Well, at this point, you’ve got yourself an extra strong frame of a greenhouse and you’re ready to move on to inserting the panels. The author of the article sealed the ends of each panel with aluminum tape to help keep dirt, condensation and bugs out. “I bought one roll of 1 ½” wide aluminum tape (not duct tape) and cut it into thirds, so I only have a small taped rim visible on the panels. On the bottom edge, it’s apparently good to have small holes in the tape to allow moisture to escape. You can buy special breathable tape from greenhouse supply websites for this purpose, but others have mentioned using a large pin to poke holes in the tape in each chamber on the bottom edge of each panel.”
How about weather stripping? Well, the author has a suggestion for that as well. “Instead of caulk, I used 3/16” thick closed cell foam weather stripping in each panel opening. Closed cell foam is waterproof so rain can’t soak in.” The larger gaps on the tops and bottoms of each panel are also mentioned. “I found some packages of ¾” wide weather stripping. I used that, cutting each strip in half with scissors, so it was 3/8” wide. It worked fine and turned out to be a soft gray color that was hardly visible under the panels after installation.”
Okay! So now that you’ve gotten your greenhouse constructed and ready to withstand those heavy winds, you’re ready to add even more awesomeness! That’s right, there’s still more you can do to enhance the greenhouse to make it more attractive and convenient. The author added long benches to each side of her greenhouse along with several peninsula-style benches. “Each long side bench is supported by two pressure-treated 4x4s, buried 24" deep and set in concrete. [Then] two horizontal Douglas Fir 4x4's were clamped to either side of the two pressure treated posts. The horizontal 4x4’s were attached by using a 12" long 3/8" drill bit to drill a hole through all three 4x4's. A length of 3/8" all-threads rod was inserted in the hole and capped on each end with a washer and nut.” This addition will provide plenty of shelving space plus ample free space underneath for tools, equipment and supplies.
If you want to get really fancy, the author even added a sink to her greenhouse and explains how it can be used for added benefit. “The sink drain isn’t connected to our house plumbing. It drains into a gravel pit we dug in the floor, and the soil beneath the gravel is the coarse sand of our yard. Another option for the future would be to route the drain water through the wall of the greenhouse and outdoors to water a planting bed.”
Still want more enhancements to your bodacious greenhouse? The author of this article really decked hers out to include some pretty cool additions to improve functionality. She added electrical outlets with plastic covers to keep out moisture, Aluminet shade cloth screen panels to keep temperatures down and even an exhaust fan as a way to let air out. These are obviously more advanced enhancements but the possibilities are there for those willing to put in some extra work. And for those hoping to use their greenhouse continuously, they can be a real help, as the author states, “Without this fan I wouldn't be able to keep plants in the greenhouse year round...our summers would be far too hot. With this fan in place, as well as some additional small fans for HAF (Horizontal Air Flow) and generous amounts of shade cloth, I'll have a fighting chance.”
As you can see, getting your Harbor Freight greenhouse built is only the beginning of your journey and you’re limited only by your imagination! I don’t know about you but I would love to have benches, a sink, air conditioning and weather stripping in my little home garden. For anyone who wants to get serious about their plants and flowers without spending serious money, this is the way to do it.
When it comes to riding your motorcycle, it's not enough that it just runs good-- you gotta look good. So make sure you check out Super Streetbike's April 2013 issue (no, not the cover, lug nut-- I'm talking about YOU looking good).
On page 58 there's a nifty article on "Helmet Painting"-- a cool, inexpensive way to self-express on the road. But, as writer Brian Hatano points out, you need more than a creative idea to get your point across; it takes technique. So, he takes you through every step you probably don't think about when imagining that wicked skull with flames and roses... namely, preparation, detail, method and materials. To get the hang of the spray gun skills, though, Brian suggests we first get the feel of it with a practice helmet:
"For practice jobs, any helmet will work, but starting with a lid in good condition will require less initial prep and give you more time to think about designs and color combinations."
He then breaks down the process of executing a successful paint job-- from disassembling the helmet to applying the clear coat-- in crystal, concise detail. Great intel to have for when you're ready to go for it.
Interesting, however, is that even though Brian was working in a shop equipped with a large air compressor, he opted instead to go with the Central Pneumatic 1/5 HP, 58 PSI Airbrush Compressor.
"Although we had a full size compressor available, we tried out the Harbor Freight Central Pneumatic 1/5th HP Airbrush Compressor and it performed better than units costing twice as much. Zac noted the quiet motor with no pulsing in the air supply."
Constructed of sturdy anodized aluminum, the airbrush compressor is easy to clean and operate, and changing colors is a cinch. The airbrush kit works with lacquers, oils and latex-based paints to create pro-quality designs only limited by your imagination! It comes with a 22cc glass jar, 5cc metal cop and 5-ft. air hose-- and, at a low $88.99, it'll pay for itself over and over again!
While you're shopping, also be sure to pick up the Central Pneumatic Quick-Change Airbrush Kit for just $11.99. This enables you to switch out paints in a flash with next-to-no downtime.
This awesome setup would also be perfect for custom painting:
- Bike frames
- R/C and other models
- Auto body detail art
- Tool boxes or cabinets
- Metal sculpting
- Signs and murals
- Cosmetic and Halloween makeup
- Spray tanning
- ...and so much more!
Also, of course, if you want to support the team at the big game.
Summer's almost upon us-- in about a hundred days-- and if you're like me, you're probably asking yourself, is this the year I finally realize the dream of building my own surfboard? It may seem like a daunting task, especially for those of us who aren't exactly Bob Vila, let alone the Big Kahuna. But, with a few swipes of the keyboard, help manifests itself once again:
Not too long ago, Stephen Pirsch, a visionary in board construction, released a book entitled,"How to Build Your First Surfboard," an easy-to-follow, detail-rich DIY paper on the subject. Written for first-time builders, this guide was created to lessen problems and save money-- especially to prevent the typical board-ruining mistakes.
"This book is for the garage or backyard builder who has few tools and little money. The following information has been tested, and is the result of friends building their first surfboard with me. Also, thousands of interesting people have emailed their questions and results."
Turn to the Equipment chapter, and there you'll find a list of tools and supplies needed to get the project going. As this tutorial is geared towards the O Mighty Ones of Little Cash, however, Surfer Steve is careful in recommending his tools:
"Hundreds of dollars can be saved by using the following tools compared to industry standard tools. The following has been extensively tested (on 6 boards in 2012) by the author, the expense and labor solely for the benefit of you, the reader (The author already owned the industry standard tools). Be aware these tools are not designed for heavy duty, continuous production use, but will work well for the occasional garage built board."
Drill Master 5.5 Amp 3-1/4" Electric Planer (#91062) (or, similar, for a few dollars more, the Chicago Electric 3-1/4" Heavy-Duty Electric Planer with Dust Bag - #95838)
"1. This planer has a 1/16" maximum cutting depth. The depth can be doubled to 1/8" by loosening the cutting blades and extending them 1/16"(the tools for this are included). The depth can be tripled to 3/16" by grinding the front plate (the plate on the bottom which adjusts up and down). Put a 3" abrasive cutting wheel on your drill, or a 6" abrasive cutting blade on your sander/polisher (this tool mentioned below) and slowly grind the plate with the wheel almost parrallel to the plate - this will take one to two hours. If you over grind or grind unevenly, it can be filled with 5 minute epoxy. After modification this planer works very similar to the industry standard Hitachi
2. In contrast to surfboard foam planing shown in youtube videos, a planer is designed to be used parallel to the direction of work (not 45 degrees), Holding at 45 degrees reduces the cutting area by 1/2 which doubles your labor, and increases the possibility of an error."
"1. (Shop for) assorted 6" hook and loop sanding disks... if you buy from industrial suppliers you will have to buy an absurd amount of each grit.
2. Initially run sander at lowest speed, and practice on a scrap piece of foam that has been laminated and hot coated. Very slowly sand into the cloth and through the cloth, so you can see what to avoid.
NOTE 1: This purchase is worth it for the accessories alone.
NOTE 2: Hook and loop sandpaper is the best type because it is the easiest, and fastest to change and can be re - used. Hook and loop usually costs more initially (although not with this purchase), but costs less in the end, especially in cost of time."
"1. You will need a router bit with 1" long cutter for Fins Unlimited Boxes - 1" bits are rare.
2. A 12"x 6"x 3/16" template can be made out of 3/16" panel board (get 4'x 4' piece at Lowe's. To achieve 5 degree lean on twin or tri fins, an additional 1"x 12" piece of 3/16" panel board can be duct taped to the bottom edge of the template. The entire template can be held in place with Gorilla brand duct tape.
NOTE: By the time you adjust the router and bit, and make a template, you could cut out about 5 boxes by hand. After making template (and practicing) it is faster and more precise with a router. The Harbor Freight cutout tool can also be used as a router."
Additional EQUIPMENT LIST:
Respirator with dust and vapor cartridges
Magnetic torpedo level
Drill preferably with two handles, variable speed and, 2000 to 3000 rpm.
Hand saw (wood)
Sharpie fine marker pen
Block plane (smallest)
5" rubber/plastic back-up pad with 1/4" shank (for sanding disks on drill)
Hacksaw blade (coarse)
Optional 1" paddle bit to match optional 1" leash cup
"You might be asking yourself, do I really want to do this? Is saving half the money of a showroom surfboard, buying the tools, pouring sweat, blood and time into this little venture going to be worth it? Surfer Steve has an answer for that:
"Building a board can be very rewarding. Everyone who follows the directions manages to finish somehow, and almost everyone who makes one will make another. Much of the work and expense on the first board (such as racks, blocks, and tools) won't have to be duplicated on following boards.
"So I bought this thing because I took my carb to a buddies house the first time I was taking it apart and we used his. My carb had gunk all over and was generally dirty from being used. This ultrasonic gizzmo cleaned my carb to the point where it looked fresh out of a hot tank, inside and out. I was very impressed."
When he took it home, he tried different cleaners with it. One different work. Another was so sotrong, it would tarnish. Finally, he found the perfect "solution":
"I went back to Harbor Freight and bought a gallon of this business they use in their regular parts washers for only $9.99. I run a 50/50 mix with water and it cleans fantastically. Straight out of the jug is pretty concentrated stuff. I really recommend diluting it some."
And once he figured out the formula, he threw everything he could find into the cleaner.
"Since, I've used it on all kinds of things. Most useful to me has been on fasteners but greasy nuts, bolts, washers, brackets, spacers, sprockets, clutch and brake perches, cleaning up my tools, my carburetor components, suspension components and even a whole chain. Yes, the whole chain."
Besides motorcycle and automotive parts, the 2.5 Ultrasonic Cleaner is great for cleaning gun parts and brass, jewelry, coins, brasswind parts, pinball machine parts, e-cigarette tanks, medals, eyeglasses, tattoo tubes, grips and tips, bionic parts, coffee ground cups, and so much more! It works with our without heat, and is programmed for five cleaning cycles. At only $74.99, it's a great machine at a great price.
Now, back to Master_E:
"So I thought I'd share a couple before and afters. I actually struggled to find things that needed cleaning, but I did find a couple things. These parts were never prep'd or polished after coming out of the cleaner. They went straight in, ran a cycle then brought out and dried off. Thats it. No scrubbing, no brushing, no scraping, no wiping down with a rag at all."
(Click on the pics to enlarge)
You can't argue with the evidence. The Chicago Electric 2.5 Liter Ultrasonic Cleaner is a perfect addition to any workshop or home where parts and pieces get dirty. Go get yours now-- and don't forget to take a 20% Off coupon!
To quote Master_E's parting remark:
"Cheers! Now go clean some stuff!"
Painting the Car
One of the most time-consuming and important projects you'll perform in the auto restoration process is to paint the sucker. Painting a classic car is more of an art than a mechanical procedure, and doing a good job means summoning patience and a bit of perfectionism from your normally "that's good enough"-self. That new, glossy paint job will make the slightest blemish look pronounced and no matter how awesome the ride's going to look, believe me, you'll be staring at that blotch like my teenage daughter obsesses over a zit.
First, choosing the paint: Most likely you'll be compromising between the quality and budget. Most paints nowadays do a pretty good job of protecting the underlying metal, but cheaper paints can be less tolerant to sun, and will fade quickly if the car sits outside for any length of time. Regardless of the type of paint you choose, remember you get what you pay for. More expensive paints will last longer and retain their pigment better than the "bargain" paints.
Just a couple more things to cover before we move on to the equipment: proper preparation. Especially if it's assembled, the car first needs be taped off, using masking tape and paper. You might be thinking, heck, I'll just use newspaper. But newspaper is porous and can let paints-- especially clear coat-- bleed through onto the glass and trim, leaving a time-consuming mess. It costs a little more, but using a less porous paper-- making paper better still--will make the job a lot easier. Plastic can be used to bag the engine bay and other areas that won't be painted, and wheel covers or trash bags can be used to cover the wheels and tires. Once taped, the car is prepared by wiping it down with a cleaner (Naphtha is usually the main ingredient) to eliminate any oils or foreign materials from the surface that could cause fish-eyes or other blemishes. Finally, the car is wiped down with a tack-cloth to remove any dust or debris that could affect the paint job.
If you don't have a lot of experience painting cars, following the instructions on the MSDS will help you apply a good paint job. If done properly, your paint job should protect your car and look great for many years.
Now on to the equipment. The primer is already on, so our designated restoration artisan turns to the...
The HVLP spray gun's material transfer gives you better, more consistent coverage than conventional spray guns, and with minimal messy over-spray. It comes with a 20 oz. gravity feed gun that operates at 30-35 PSI and detail gun that performs 25-30 PSI, and comes with stainless steel needles and tips on both guns. Our technician used this, along with a 33 Oz. Gravity Feed Paint Cup to spray two coats of red paint and three coats of clear. After which, he color-sanded the body with dish soap & water, 1200 Grit Sandpaper, using a 4-7/8" Soft Rubber Sanding Block to knock off the "orange peel." How does our spray gun kit compare to the competition's?
- Sears - US Freight Neiko Pro 2.0mm HVLP Gravity Speed Spray Gun w/Gauge #9924G - $59.99
- Northern Tool - Wagner Double-Duty HVLP Sprayer #0518050 - $94.99
- Home Depot - Husky HVLP & Conventional Spray Gun Kit #HDK00600AV - $79.99
- Lowe's - Kobalt Large Gravity Feed Spray Gun #SGY-AIR88 - $54.96
- Grainger - BINKS HVLP Gravity Spray Gun Kit #98-3170 - $204.25
Following the pain job, Jeff buffed, using this polisher/sander and then, with the waxing, delivered the classic car to an incredible mirror gloss finish!
The polisher gives you all the power and control you need for a wide variety of applications. It generates between 1000-3500 RPM for a pretty nice polish. The LCD display shows the speed and the textured grip side handle provides comfortable handling. The polisher comes with foam and polishing bonnets as well as an 80 grip sanding disc. It's also great for boats, travel trailers, stairs, etc-- all at a great price. Now here's the competition:
- Sears - Wen Variable Speed 7" Polisher/Sander #946 - $59.99
- Northern Tool - Makita 7" Sander & Polisher 3000 RPM #9227CX3 - $239.99
- Home Depot - Wen 7" Pro Sander/Polisher #946 - $59.99
- Lowes - Porter Cable 4.5 Amp Ros Power Sander/Polisher # 7346SP - $119.00
- Grainger - Makita 7" Variable Speed Sander/Polisher #9227CY - $284.75
I hope everyone had as nice and relaxing holiday as I did. Besides getting lots of badly needed downtime, we managed to see old friends, family and haunts, and accumulated new memories to add to the ol' mental scrapbook.
Over the last few days, as I was dreading the end of my vacation and return to the real world, I pondered resolutions for 2013-- both the realistic ones and the "not-a-snowball's-chance-in-hell-but-I-should-probably-make-them-anyway" ones. Typically, these goals are exercises in futility. This time, though, it occurred to me that it isn't so much what you resolve to do as much as how you plan to make it happen. As I'm sure many of you are, I'm a big fan of The Shawshank Redemption. That whole "get busy living, or get busy dying" rant impressed me like, "yeah... that's it. That's how it is." In the movie, Andy Dufresne determined his "get busy living" was finding a way out of Shawshank and escaping to a little Mexican village called Zihuatanejo. It's the perfect metaphor for anything we truly want.
So you need to first ask yourself, what more than anything would you like to do. It could be turning the garage into a man cave or craft studio, fixing all the broken things around the house, restoring your dad's dead Olds 442 or finally overhauling the backyard. But, before getting lost in your fantasy and dreaming of neat that would be...
...immediately follow up with, okay... how do I make it happen? In other words, you can't just think about what you need to start doing-- do it. Do it now. Even if you just devote 10 minutes a day, moving boxes or trimming hedges or removing engine parts, the very act of doing something motivates you to get moving, add more time and effort. and get it done. This year for me, it's not just about losing weight (yeah, I'm original), it's about walking, power-walking, doing stairs or hiking every day. NOT jumping into a gym membership-- that's just setting myself up for disaster (not to mention thwarting my budgetary resolutions). Also, choosing the types of food I eat by imagining what kind of hell my body goes through processing what I feed it (reality check: sweet potato fries is NOT a healthy alternative to regular potato fries). Again, not what you do, but how you do it.
On a sort-of related note, but not really, I have a brother-in-law who's a total Tim Taylor (Home Improvement), grunts and all, and whose name I had for Christmas. I gave him a Harbor Freight gift card (of course), but, for me, just giving a gift card's a cop out; it has to at least be accompanied by something that requires personal thought and consideration. So, I gave him a copy of Sequoia Publishing's Pocket Ref.
Super handy info for tool hounds, craftsmen, landscapers, mechanics, technicians, cooks, stagehands, maintenance workers, carpenters, installers, fabricators, testers, designers, rodeo clowns-- anyone who works with tools or does general troubleshooting-- this comprehensive, pocket-sized reference book is for anyone who does anything. It's perfect for when you use a math formula infrequently enough to forget it-- and it's better than the Internet 'cause it goes places where you get no bars! The little book is 768 pages of charts, tables, conversions, constants, facts and figures on everything you’d want to know. Covers air and gasses, automotive, carpentry and construction, chemistry and physics, computers, general science, geology, electrical circuits, electronics, drilling, cutting, adhesives, bolts, fasteners, pipes, ropes, tools, weather, welding, time zones, bunches of tables. and tons more-- AND it fits in a pocket, glove box or tool box! Excluding Taco Bell, I can't think of a better way to spend $9.99.
My brother-in-law flipped after he scanned through it for the first time. "Hell," he said, "I can see myself just sitting and reading this for fun." I recommended the bathroom.
Not for nothing, but an interesting aside, Jamie and Adam on MythBusters whip this book out from time to time and use formulas from it. Well... I was impressed.
Well, it's been a long road, but we've finally come to the end of our journey. Behold the final video installment of the '67 Firebird Restoration Project, executed exclusively with Harbor Freight Tools.
As I shared last week, the fully-restored '67 Firebird pulled into our office parking lot, and let me tell you, it was a sight to see. Ever watch the Mecum Car Auctions on the Velocity Channel? (love that show!) This car would have summoned a pretty penny on their auction block. Before it was whisked away to who-knows-where, a handful of us slowly circled around it, transfixed, muttering "wows" and "oh yeahs" under our breaths. The original interior was pristine-- black bucket seats and carpet looking like new. Under the hood, the same. In fact, the guy who did the restoration, Jeff Tann, said the 'bird's engine was better now than when it was new.
Imagine the same kind of results with your favorite Mopar or Mustang... maybe an old Apache pickup or Landcruiser. Whatever your poison, Harbor Freight Tools has got the power, air and hand tools you need for a lot less moolah than the other guys-- and they've got the fans to prove it! Get their catalog, shop their deals, clip their coupons... you won't be able to help grinning with all the cool stuff you'll be taking home for so little.
So, what's to become of the Firebird? The rumors abound. A Saudi now sheikh has it. It's in the next Bourne movie. Elvis was seen in it at a drive-through in Lubbock, Texas. No one can say for sure... I only know I offered to take it off their hands, but haven't heard back yet.
If it's going to be done right, every phase of restoring a vehicle is important. I mean, you wouldn't just rebuild or replace the carb, throw on some new paint and upholstery, and call it done (although, that's exactly what a lot of guys do). That thinking will bite you in the butt down the road-- literally. That's why the underbody gets the same attention as everything else. So... let's talk tools:
Last month I started a series illustrating how much more bang for the buck a wrencher can get from Harbor Freight Tools than they could the competition. Using the '67 Firebird Restoration project as my example, I've been breaking it down phase by phase, comparing the prices of tools used in the project with similar (if not exact) products that the competition advertises. The competitors I chose were Sears, Northern Tool, Home Depot, Lowe's and Grainger. Exact matches weren't always found, so I substituted the closest product available. As I've said before, I don't think this compromises the test because we're only talking about differences in size and shape, not power or function.
In the first segment, we looked at Harbor Freight's tools used in the vehicle's disassembly video. In the second, we explored price differences on the engine removal phase. In the third installment, we featured the tools employed in the stripping and priming process. This time we're only featuring two tools for the underbody:
Using a heavy-duty industrial de-greaser, this powerful 2000 PSI gas pressure washer is unstoppable against old, caked-on grease, oil and dirt that's accumulated on your vehicle's underbelly. Pumping out 1.6 gallons a minute, the machine is EPA-certified and easily portable on two rubber wheels. It's got a mighty four-stroke 4 HP gas engine with a cast-iron cylinder for maximum durability, pump-overheat protection, overload protection and low-oil shutdown for extra safety.
- Sears - Craftsman 2200 PSI Gas-Powered Pressure Washer - $249.99
- Northern Tool - Wel-bilt 2500 PSI Gas-Powered Pressure Washer - $249.99
- Home Depot - Simpson MegaShot 2200 PSI Gas-Powered Pressure Washer - $269.99
- Lowe's - Simpson MegaShot 2200 PSI Gas Pressure Washer - $269.99
- Grainger - Generac #5987 2500 PSI Cold Water Gas Pressure Washer - $499.25
You can't beat the quality and value of this great, little blaster! In the video they used it for blasting rust from the undercarriage, but that's just one of a zillion things you can use this tool on. Car restoration, firearm parts, tool cabinets, barbecues, metal beams, aluminum wheels, tools, to name a few. Use slag media, silica, walnut or pecan shells, sand, glass bead, steel grit and more. The portable abrasive blaster kit comes with a blast gun, 15-ft. material hose and a hopper than can hold up to 50 lbs. of abrasive media. Just hook it up to a 1 HP or larger compressor and easily remove paint, rust, graffiti, corrosion and scale.
- Sears - Sears Portable Sand Blaster - $119
- Northern Tool - ALC Suction Abrasive Blaster - $49.99
- Home Depot - Powermate Air Sand Blaster - $55.99
- Lowe's - N/A
- Grainger - ALC Siphon Blaster - $171
Check out The Video to see the tools in action during the underbody stripping procedure.
In the next installment, we'll take a look at the tools used for the Engine Rebuild, and compare them to the competition's. Until then!